Cables for MK2 generation devices.
|
[MK2 System] ARRI Run/Stop Cable (RS Port) Trigger Run/Stop remotely on ARRI cameras equipped with an RS port (e.g. Alexa). |
|
|
[MK2 System] Canon 5D/7D Run/Stop Cable (USB) Trigger remote Run/Stop on the Canon 5D MKII and Canon 7D via the camera's USB port. |
|
|
[MK2 System] DTap (PTap) Power Cable Power an RT Motion system from a DTap socket on a battery pack. |
|
|
[MK2 System] GPI PRO Power Cable Lemo 0S 4-Pin. Power an RT Motion system from the Focus socket on a GPI PRO. |
|
|
[MK2 System] Inline DC Socket (consumer type) Power Cable, 20cm Power an RT Motion system from a consumer type power supply, such as a 12V DC wall adapter or a consumer lithium battery. |
|
|
[MK2 System] Motor Cable, 60cm For PRO Digital Motors with removable cables. STANDARD LENGTH, SHIPS FROM STOCK. MiniXLR-4pin both ends. |
|
|
[MK2 System] PRO-MK2 Motor Cable, 20cm For PRO Digital Motors with removable cables. SHORT LENGTH, SHIPS FROM STOCK. MiniXLR-4pin both ends. |
|
|
[MK2 System] PRO-MK2 Motor Cable, Custom Length For PRO Digital Motors with removable cables. THIS IS A CUSTOM PART AND HAS A LEAD-TIME. MiniXLR-4pin both ends. |
|
|
[MK2 System] RED AUX - Power and Run/Stop Cable Power an RT Motion system from a RED AUX port. SUPPORTS ONE MOTOR ONLY, not suitable for powering a 3D system from the RED AUX. |
|
|
[MK2 System] RED AUX - Run/Stop Cable (No power) Perform RUN/STOP remotely via RED AUX port. DOES NOT POWER THE RT MOTION SYSTEM. You will need a separate power cable. This is the recommended solution for RED 3D setups, since the AUX is unsuitable for powering more than 1 motor. |
|
|
[MK2 System] RED Cradle / Quickplate Splitter Cable Tap power directly from your RED power supply. Required if you don't have a power supply with a DTAP or other suitable connector. |
|
|
[MK2 System] Viewfactor Cage Power Cable Power an RT Motion system from a Viewfactor Cage. ONLY TESTED WITH 1 MOTOR. |
|
|
[MK2 System] Viewfactor Cage Run/Stop Trigger Cable Trigger Run/Stop via the Viewfactor Cage's Trigger port. |
|
|
Compatible with PRO systems only (2x3 Controller & Pro-3 or Pro-4 Receiver). THIS IS A CUSTOM PART AND HAS A LEAD-TIME. MiniXLR-4pin both ends. |
|
|
[MK2 System] XLR Power Cable (Neutrik 4-pin, full size) Power an RT Motion system from a 4-pin XLR socket on a battery pack. |
|
